and explained how to use it. The com-pany said that it is possible to test the fabric in advance if you bring it in.“With conventional thermal trans-fer printing, it was necessary to use tweezers to remove ink scraps on the sheet with the pattern transferred be-fore transferring it to clothing, which requires manual labor. In DTF printing, a transferable ink layer is formed on the film when hot melt powder is sprinkled on the printing surface and heated to melt it, and the ink is transferred when the film is heat pressed onto the gar-ment. This saves the trouble of remov-ing ink scraps. We can also introduce you to several companies that handle powders and post-processing equip-ment that are compatible with our inks, so you can use the TxF150-75 smooth-ly after its installation,” says the person in charge of the project.Full color 3D printers “3DUJ-553” (left) and “3DUJ-2207”89% of the Japan Color gamut and are highly transparent, enabling modeling with better color reproduction than the plaster method, which produces whit-ish colors. Furthermore, the world’s first IJ 3D printer employs a color pro-file that improves color reproducibility, allowing users to check the colors after printing on a PC monitor and bring the colors on the monitor and the actual modeled object closer together.At the back of the second floor is a 3D scanner (1 to 2 million polygon res-olution) capable of scanning full-body, life-size scans of people and animals. Graphic Creation, a group company of Mimaki Engineering that provides printing services using IJ printers, has started printing services using this life-size full-color 3D scanner and the 3DUJ-553. Visitors to the JP Demo Center can take full-body photos with the 3D scanner and receive mini-fig-ures made from the data by the 3D printer as samples at a later date.“The photo shooting is complet-ed in an instant, and data conversion takes about 20 minutes. A palm-sized figure can be produced in about one hour with the 3DUJ-553 and about six hours with the 3DUJ-2207. One of the features of our 3D printers is that the equipment cost is lower than that of conventional machines,” says the per-Post-processing machine for DTF printing (powder, thermo-compression, heat press transfer). A T-shirts is ready in about 5 minutes after film printing.The ink used in UV-cured IJ 3D printers is an acrylic resin that hardens when irradiated with ultraviolet light, and has the same strength as ABS res-in. The ink is formed by building up the coloring layers, one by one, by multi-plying CMYK, W, and clear (Cl) colors of the UV ink. The color inks cover 513D printing experience with full-body scannerIn a separate room on the second floor, there are products that require special ventilation and smoke exhaust equip-ment, such as a solvent UVIJ printer “SUJV-160”, a laser processing ma-chine, and a sublimation transfer press “Mod.180-T” manufactured by Monti Antonio of Italy. In addition, as a 3D printer area, a UV curing IJ method full color 3D printer “3DUJ-553” and its small machine “3DUJ-2207” are in-stalled.
元のページ ../index.html#53