|
This film forming machine coats in a vacuum using a roll-to-roll system.
Characteristics:
-Vacuum Exhaust System
Oil circulation pump + dispersion pump + poly cold chiller + turbo particle pump (with pressure control valve). The main vacuum pump can be equipped with a cryo pump or a turbo particle pump. Exhaust speed: 2×10-3 Pa within 15 minutes. Final pressure: less than 1×10-4 Pa
-Rewinding System
Tension feedback control + speed control. Chilling roller (-10 to 150ºC)
-Can be equipped with a maximum of three Magneto Sputtering systems having a DC or RF power source. Electron gun or resistance heating can also be used for metallization.
-Pretreatment System
Heater based gas release mechanism. Surface treatment using an RF power source is also possible
Specifications:
-Substrate: PET film, TAC film, other films, metal foil
-Speed: 0.5 to 10 m/min
-Substrate Width: 700 mm (can also handle arbitrary widths)
-Substrate Length: 300 mm (can also handle arbitrary lengths)
|
Contact Information:
1-140 Yachimataro, Yachimata, Chiba 289-1144 Japan
TEL.+81-43-440-1781 FAX.+81-43-440-1782
Email:Rock-Giken@rock-giken.co.jp
URL:http://www.rock-giken.co.jp/en/
|
Sales Office:
Sakura Factory
281-14 Yachimatai, Yachimata, Chiba 289-1143 Japan
Tel: +81-43-440-6331 Fax: +81-43-440-6332
Products:
Gravure Printing Machines, Gravure Offset Printing Machines, Laminators, Coaters, Rewinding Inspection Systems, Vacuum Deposition Systems, Sputtering Devices, etc.
|