Flat Expander (FE), Miravo Roll (MRV)

Mitsuhashi Corporation
mitsuhashi_ex

Flat expanders (FE) are elastic band type straight wrinkle removing rolls, and expand the following webs (sheets) and remove wrinkles without distorting a web. The flat expander has obtained high evaluation from the consumer as a wrinkle removing roll can be used easily with its light rotation. Since it is an elastic band type, an elastic band can be easily exchangeable on the site.

[ Applicable machine ]
Slitter, laminator, winder, coater, printing machine

[ Applicable web ]
Cloth, nonwoven fabric, film, paper, glass fiber

Miravo Roll (MRV) is a rubber tube type straight wrinkle removing roll, and the webs, such as a nonwoven fabric, a plastic film, paper, glass fiber, and metallic foil, are ideally expanded and at the same time a wrinkle can be removed without distorting a web.
Miravo Roll (MRV) is designed to be adapted for the factory line of a thinner web which needs more nearly high-speed and more precise expansion as compared with an elastic band type (FE) wrinkle removing roll.

[ Applicable machine ]
Winder, slitter, coater, printing machine, laminator, metalizing machine, copper or Al foil manufacturing process

[ Applicable web]
A nonwoven fabric, film, paper, glass fiber, metal foil


Contact Information:
1, Yamanochi Sekisancho, Ukyo-ku Kyoto-shi, Kyoto, 615-0082, Japan
TEL.+81-75-316-3300  FAX.+81-75-313-7595
Email:info@mitsuhashi-corp.co.jp
URL:http://www.mitsuhashi-corp.co.jp/en/

Sales Office:

Products:
LPC, Air Shaft, Wrinkle Removing Roll

To request detailed materials on the above product, please click the contact button below.
 

LPC Web Guide System

Mitsuhashi Corporation
LPC_Mitsuhashi

It realizes highly precise meandering control of web sheet conveyance with the state-of-the-art technology.
LPC web guide system has been used widely in paper, a film, rubber, the fiber industry, etc. since the development / commercial production in 1953.

[ Feature ]
■ The LPC web guide system consists of a detector, a control device, and a drive machine.
A control device can be chosen based on selection of a detector and a drive machine.
■ General classification of a detector will divide it into an optical reflective type, an optical transmission type, and an ultrasonic transmission type.
A reflective type detector is mainly used for detection of a line mark, and a penetration type detector is mainly used for the edge detection of a web.
■ According to a form of operation, a straight line type actuator, a rotating type roll guider, and a revolving control motor can be chosen.

[ Use ]
Slitter, laminator, and web guide at unwinder, rewinder, intermediate roll control in the printing or converting process line.

[ Model name ]
– Control panel : PEM-200、 PEM-3000
– Detector : PSM-46W、 PSM-75W、 PSM-270、 PSM-2000、 PSM-1500
– Actuator: PDM-400,610,620,650
– Roll guider : PGM-15、 PGMW-15、 PGM-8000、 PGM-400

[Feature]
– Compared with conventional device PW-1000, it raises the resolution of control 10 times and raises a response 3 times. The highly precise meandering correction control with little hunching is possible.
– It equips with a touch panel (5.7-inch color TFT). Since it can be operated intuitively, setup and adjustment can be performed in comfort. The operating condition of the amount of corrections of a line or a drive machine is also displayed clearly. It can operate while controlling a meandering correction.
– Compared with the conventional device, the depth size was miniaturized to 60%.


Contact Information:
1, Yamanochi Sekisancho, Ukyo-ku Kyoto-shi, Kyoto, 615-0082, Japan
TEL.+81-75-316-3300  FAX.+81-75-313-7595
Email:info@mitsuhashi-corp.co.jp
URL:http://www.mitsuhashi-corp.co.jp/en/

Sales Office:

Products:
LPC, Air Shaft, Wrinkle Removing Roll

To request detailed materials on the above product, please click the contact button below.
 

Air Shaft AIREX Series

Mitsuhashi Corporation
AIREX Series

A rubber tube is used for an inside as an expansion object, it swells by air, and I raise clutch for a core clamp, and clamp a core certainly.
In addition to the wide range proven size of ø25-ø450, there are abundant variations including the object for double side support and cantilever support.

– Air shaft series
O AIREX double side support Type shaft
O AIREX cantilever support Type shaft
O AIREX leaf Type shaft
O AIREX hanger Type shaft
O AIREX stroke adjustment Type shaft
O AIREX precision type Type shaft
O AIREX paper tube connector Type shaft
O AIREX W winding Type shaft
O AIREX doughnut Type shaft
O AIREX adapter


Contact Information:
1, Yamanochi Sekisancho, Ukyo-ku Kyoto-shi, Kyoto, 615-0082, Japan
TEL.+81-75-316-3300  FAX.+81-75-313-7595
Email:info@mitsuhashi-corp.co.jp
URL:http://www.mitsuhashi-corp.co.jp/en/

Sales Office:

Products:
LPC, Air Shaft, Wrinkle Removing Roll

To request detailed materials on the above product, please click the contact button below.
 

Return Top