-MEITACK
Excellent thermal stability and weather resistance (thermal stability up to 110ºC)
Has conductivity (107Ω)
-MEITACK NB (non-bleed)
A bleedless type that prevents particles from transferring to the contacted material
Other characteristics are the same as those for the MEITACK Series
-BETARON
Excellent surface characteristics, oil resistance, water resistance, and chemical resistance
-UE TACK
Using the properties of a special resin, this roll can remove dust (weak adhesion)
Excellent wear resistance
Has conductivity (108Ω)
-SILIC SWEEPER
Using the suction strength of a special silicone, this roll can easily remove dust and debris
Excellent thermal stability, weather resistance, and wear resistance (thermal stability up to 180ºC)
Ideal for adhering mylar films to substrates

Applications:
Printed circuit board production processes, liquid-crystal plate processing, film production processes, precision equipment and electronics production processes

class=“qtranxs-available-languages-message qtranxs-available-languages-message-en”>Sorry, this entry is only available in class=“qtranxs-available-language-link qtranxs-available-language-link-ja” title=”日本語”>Japanese.

The Light Hammer 10 UV curing device brings all of the benefits of microwave-powered UV lamps to a ten-inch (254 mm) system. Using DC power supply irradiation, the system is able to form cured films with more uniform molecule sizes than AC power supply UV lamps.

Characteristics:
*Solid-state DC power supply
-Reduced power costs
-Reduced noise
-Space savings
-Improved curing performance and efficiency via steady light irradiation
*Electrodeless Lamp
-High output and intensity
-Long-life
-Low-heat
-Instant lighting (irradiation is possible in seconds)
-Steady output and spectrum (no drop in output for the entire life of the lamp)

Applications:
-Functional UV coating film forming
-UV curing of complex 3D substrates
-Coating of cured film surfaces that require smoothness
-Coating of surfaces that require strong adhesion with the substrate
-Coating of high-concentration pigment coatings
-Ultra-thin and ultra-thick coatings, etc.

Specifications:
-Lamp Length: 25 cm (lamps can be arrayed to form wide systems)
-Maximum Output: 240 W/cm
-Output Level: variable between 35 and 100% of output
-UV Wavelength (spectrum): lamp bulb can be chosen depending on the application

As a pioneer in UV curing devices and process technology, Fusion UV Systems is a leading global supplier.

class=“qtranxs-available-languages-message qtranxs-available-languages-message-en”>Sorry, this entry is only available in class=“qtranxs-available-language-link qtranxs-available-language-link-ja” title=”日本語”>Japanese.

This film forming machine coats in a vacuum using a roll-to-roll system.

Characteristics:
-Vacuum Exhaust System
Oil circulation pump + dispersion pump + poly cold chiller + turbo particle pump (with pressure control valve). The main vacuum pump can be equipped with a cryo pump or a turbo particle pump. Exhaust speed: 2×10^-3 Pa within 15 minutes. Final pressure: less than 1×10^-4 Pa
-Rewinding System
Tension feedback control + speed control. Chilling roller (-10 to 150ºC)
-Can be equipped with a maximum of three Magneto Sputtering systems having a DC or RF power source. Electron gun or resistance heating can also be used for metallization.
-Pretreatment System
Heater based gas release mechanism. Surface treatment using an RF power source is also possible

Specifications:
-Substrate: PET film, TAC film, other films, metal foil
-Speed: 0.5 to 10 m/min
-Substrate Width: 700 mm (can also handle arbitrary widths)
-Substrate Length: 300 mm (can also handle arbitrary lengths)

class=“qtranxs-available-languages-message qtranxs-available-languages-message-en”>Sorry, this entry is only available in class=“qtranxs-available-language-link qtranxs-available-language-link-ja” title=”日本語”>Japanese.

class=“qtranxs-available-languages-message qtranxs-available-languages-message-en”>Sorry, this entry is only available in class=“qtranxs-available-language-link qtranxs-available-language-link-ja” title=”日本語”>Japanese.

class=“qtranxs-available-languages-message qtranxs-available-languages-message-en”>Sorry, this entry is only available in class=“qtranxs-available-language-link qtranxs-available-language-link-ja” title=”日本語”>Japanese.

Our LSC-4000 Series Advanced Defect Inspection System is a top ranked inspection system often adopted in the optical and functional film fields.

Characteristics:
-CameraLink 160 MHz camera allows for high-speed, high-resolution inspection
-Each image processing board can be linked with two cameras
-Comes equipped standard with 2DF, required for high-performance
-32 bit processing allows for differentiating intensity variation of less than 0.1%
-Greater than 10x defect inspection capability (MEC comparison)
-Greater than 5x defect image capture capability (MEC comparison)

“Fine Monitor”: Defect Imaging Monitoring Unit
-Revolutionary device that can capture, display, and store magnified images of defects in real time
-Able to capture images with a resolution of under 5 μm
-Can be added to existing LSC Series equipment
-Dramatically improves quality management at the site of production

Summary:
Our miniature tabletop test coater can use wire bar, doctor blade, and applicator coating methods, among others, to automatically coat ink, coatings, and adhesives, etc., onto materials including paper, film, and metal foils.
Because the coating unit moves at a constant speed, anyone can easily produce coating samples.

Specifications:
-Coating Methods: wire bar, applicator, doctor blade, etc.
-Coating Size: A4, A3
-Coating Speed: Max. 6 m/min